Contact | 日本語 | 简体中文

Wet Blast Process cell Index Rotary Type
AMP600/400

AMP600/400 Overview
AMP600/400

Summary

Index cell for large parts which can implement continuous production as it has a function that can replace two stages, i.e., wet-blasting stage and work piece setting stage, so both processing and setting work piece can be done at the same time.

Feature

  • There is no dent as the work piece is processed one by one.
  • Nozzle position and processing time are controlled by servo-control.
  • By replacing two stages (i.e., blasting and work piece setting parts), you can set a work piece while processing.
  • Three guns process to a three-dimensional work piece uniformly.
  • Entrainment prevention works by closing a safety front door when the table is inverting.

Spec

Size1750(W)×2400(D)×3155(H)mm
Inner diameters1500(W)×1035(D)×1210(H)mm
Processing time30s~/batch
Gunφ11 Long Gun : 12-15 pieces
Power supplyAC200V, 50/60Hz, 3 phases
Power consumptionAbout 15kW (Total rated apparent power of all the cell)
Air supply pressure0.5MPa or more, 0.7MPa and below
Air consumption16m3/min (NTP at 0.4 MPa of preset blast air pressure)
Exhaust20m3/min
OptionDrain Processing Unit, Abrasive automatic supply unit, Sludge Recovery unit

Examples of application