Manual wet-blasting cell for removing support materials

REPISH Overview


Manually-operated wet-blasting cell for removing support materials on the surface of product processed by a laser etching cell.


  • Removal of the slime on the surface without making a scratch on the model, by using plastic abrasives.
  • It runs on an AC 100V power source and can be used in a wide range of areas, since no pumping installation is necessary.
  • Processing with lower pressure compared with water-jet.
  • Two types of guns used for different part shapes.


Size736(W)×812(D)×1700(H)mm (cell)
Inner diameters700(W)×600(D)×620(H)mm
WorkObjects processed by photo fabrication
Maximum work piece weightAbout 25kg
Gunφ3.4mm Spot Gun
φ5mm Long Compact Gun (Fixation Bracket)
Power supplyAC100V, 50/60Hz, Single phase
Air supply pressure0.5MPa or more, 0.7MPa and below
Air consumption220L/min (NTP at 0.4 MPa of preset blast air pressure at φ3.4mm Spot Gun)