Wet-blasting processing cell with X-axis Overview
Processing cell which can process the whole surface of the work piece with its size up to 600x250mm. The wide gun with 250mm width nozzle moves forwards the X-axis direction. It is applicable to deal with different work piece figures, due to the jig figures.
- The nozzle with 250mm in width is moved toward the X-axis direction and is applied uniformly for the area up to 600mm x 250mm.
- Various types of the work pieces can be processed by changing jigs.
- Using a teaching pendant, various programs such as gun's operating position, gun speed and blast projection's switch on-off are applicable.
|Work size||max 600×250mm|
|Gun||Wide Gun 250mm ×1|
|Gun Driving||X-axis Driving|
|Gun Driving Speed||1-300mm/s|
|Power supply||AC200V, 50/60Hz, 3 phases|
|Power consumption||About 4.2kW (Total rated apparent power of all the cell)|
|Air supply pressure||0.5MPa or more, 0.7MPa and below|
|Air consumption||4.1m3/min (NTP at 0.2 MPa of preset blast air pressure)|
|Option||Sludge Recovery unit,|
Gun's tilting function (Automatic switchover for the angles of 0, 45 and -45 degree.)