Wet Blast Process cell Index Rotary Type

WFB-602T Overview


Index processing cell for small parts which can implement continuous production as it has a function that can replace two stages, i.e., wet-blasting stage and work piece setting stage, so both processing and setting work piece can be done at the same time.


  • By replacing two stages (i.e., blasting and work piece setting parts), you can set a work piece while processing.
  • The gun can move towards the X-axis (i.e., right and left hands directions) together with three tilting positions powered by theta drive. It can process upper and side surfaces of three-dimensional work piece.
  • Entrainment prevention works by closing a safety front door while the table is inverting.
  • At the inversion, the shutter which separates blasting and work piece setting stages, opens and closes by an up-and-down movement in order to prevent scattering of blasting liquid into work piece setting stage.


Inner diameters1150(W)×1240(D)×1035(H)mm
Work sizemax 500×300mm
GunWide Gun 300mm ×1
Gun DrivingX-axis : 500mm
θ-axis : 0°,45° -45° (3 position)
Power supplyAC200V, 50/60Hz, 3 phases
Power consumptionAbout 4.4kW (Total rated apparent power of all the cell)
Air supply pressure0.5MPa or more, 0.7MPa and below
Air consumption4.6m3/min (NTP at 0.2 MPa of preset blast air pressure)
OptionSludge Recovery unit

Examples of application