Wet blasting equipment with an X-axis LambdaTypeⅡ
Equipment Overview
Lambda TypeⅡ
Wet blasting equipment with an X-axis
Automatic processing equipment that uses a single-axis wide gun to processes the entire surface of plate-shaped workpieces.
This processing equipment is ideal for high-mix low-volume production, capable of uniformly processing a 600 x 300 mm area with a wide gun that is driven by a single axis. Teaching pendant allows programming of gun operating position and speed, as well as the ON/OFF of blast projection.
Refer to the equipment catalogs "Lambda TypeⅡ" for this equipment.
Equipment Features
- Semi-automatic
- Standard
- 320 mm wide gun x 1)
- X-Axis Gun Drive
- Manual Loading & Unloading
- Automatic Processing
Main Applications
Flow Inside the Equipent
Workpiece loading and unloading are done manually. Otherwise, they are done automatically.
Wet Blasting (Automatic)
Equipment Spec
Dimensions | 1350(W) x 1348.4(D) x 1930(H)mm |
---|---|
Workpiece Sizes | max.600 x 300mm |
Gun | 320 mm wide gun x 1 |
Gun Drive Type | 1-axis Horizontal Slide |
Gun Drive Speed | 1-200 mm/sec |
Power Supply | AC200V, 50/60 Hz, 3 phases |
Power Consumption | Approximately 6.5 kW (total of all equipment and rated power) |
Air Supply Pressure | 0.5 MPa-0.7 MPa |
Air Consumption | 6.0 m3/min (NTP, at 0.25 MPa of preset blast air pressure) |
Options | Automatic Abrasive Supply Unit, Sludge Collection Unit, Drainage Unit |
Related Equipment
"Lambda TypeⅡ" Catalog
Refer to the equipment catalogs "Lambda TypeⅡ" for this equipment.