Wet Blast Process cell Index Rotary Type / WFB-602T
Wet Blast Process cell Index Rotary Type
Two-stage index type wet-blasting cell that allows for both processing and workpiece replacement at the same time
Index processing cell for small parts which can implement continuous production as it has a function that can replace two stages, i.e., wet-blasting stage and work piece setting stage, so both processing and setting work piece can be done at the same time.
- By replacing two stages (i.e., blasting and work piece setting parts), you can set a work piece while processing.
- The gun can move towards the X-axis (i.e., right and left hands directions) together with three tilting positions powered by theta drive. It can process upper and side surfaces of three-dimensional work piece.
- Entrainment prevention works by closing a safety front door while the table is inverting.
- At the inversion, the shutter which separates blasting and work piece setting stages, opens and closes by an up-and-down movement in order to prevent scattering of blasting liquid into work piece setting stage.
|Work size||max 500×300mm|
|Gun||Wide Gun 300mm ×1|
|Gun driving||X-axis : 500mm
θ-axis : 0°,45° -45° (3 position)
|Power supply||AC200V, 50/60Hz, 3 phases|
|Power consumption||About 4.4kW (Total rated apparent power of all the equipment)|
|Air supply pressure||0.5MPa-0.7MPa|
|Air consumption||4.5m3/min (NTP at 0.2 MPa of preset blast air pressure)|
|Option||Sludge gathering unit|