Large manual wet blasting equipment MSB-3

Equipment Overview

MSB-3

Large manual wet blasting equipment

Manual equipment capable of handling large three-dimensional shaped workpieces in a large processing chamber.

Manual equipment for large workpieces with a processing chamber that is 980 x 1470 x 830 mm in size. By combining a turntable and gun swing, the entire surface of the workpiece can be easily processed. The door is a double-sided open type for easy loading and unloading of workpieces.

Catalog Download Page

Refer to the equipment catalogs "MSB-3" for this equipment.

Equipment Features

Manual
Standard

9.5 mm Compact Gun x 1
Manual Turntable
Manual Loading & Unloading
Manual Processing

Main Applications

Maintenance of plant equipment

Wet Blast can physically clean oil, rust, dirt, etc. that adhered to the parts that were removed during equipment maintenance.

Cleaning of critical parts for maintenance

Removes rust and stubborn stains, streamlining operations and significantly reducing maintenance time.

Flow Inside the Equipent

Loading and unloading of workpieces and wet blasting are done manually.

Wet Blasting (Manual)

Equipment Spec

Dimensions	1500(W) X 1574(D) x 1870(H)mm
Workpiece Sizes	1200(W) x 800(D) x 650(H)mm (When rotary table is used: Approximately 650 × 650 × 650 mm)
Basic Load Capacity	50kg
Gun	9.5 mm Compact Gun x 1
Power Supply	AC200V, 50/60 Hz, 3 phases
Power Consumption	Approximately 2.0 kW (total of all equipment and rated power)
Air Supply Pressure	0.5 MPa-0.7 MPa
Air Consumption	0.7 m³/min (NTP, at 0.4 MPa of preset blast air pressure)